Company News
| Intelligent electric batch networking controllerUpdate:2026-03-22 |
 Suitable for: UPS industry/energy storage industry/server industry/new energy industry, suitable for a variety of screw lock/foolproof/multiple modes/voice broadcast/with scanning function/with grating sensing/data upload and collection function (wireless and Ethernet transmission) Intelligent networking monitoring electric screwdriver: 2. Implement the display of the locking status, set the number of turns, lock the brake signal (rely on the brake signal and the set number of turns to determine the locking OK and NG) 3. Set the torque calibration mode: (the premise torque inspection is OK such as 6 kg), enter the target torque 6 kg on the screen, the test torque is (the torque tester 485 communication interface is connected to the controller, when the test torque reaches 6 kg plus or minus 5-10%, after the judgment is qualified, the screwdriver will check OK and other bright blue, Test torque can also be uploaded to the system. The electric screwdriver can be used normally, and the set time is 0-24 hours for verification once, if it is not checked, the machine will be locked. 4. The intelligent screwdriver can set the quantity, lock with sliding teeth (the number of turns can be set), leakage lock and other functions, lock with OK count, NG not count, and unscrew without quantity. The number of screws and production capacity can be counted per day (screw conversion products), and the system can be uploaded. 5. It can be monitored to monitor the implementation resistance of each electric batch to the end of the bit, and the resistance can alarm or stop working if it exceeds the set value. 6. The device can upload data through 485 or Ethernet, wireless 433 mode, save the PC side, or connect to the MES system (we provide HTTP common protocol, dock with your company's MES system, can connect to the company's LAN, query data on other computers 7. Display Chinese and English languages. 8. Up to 8 electric screwdrivers form a linkage, and the working mode can be set in a variety of ways, and the first locking screw is completed |
Next Article： NONE |